Stránka 1 z 3

[QuRouter, finální verze] QuRouter (fw) pro router QHora-301W

Napsal: 02 úno 2021, 16:04
od lars
Obrázek

Vyšel nový firmware pro QNAP router QHora-301W s označením "1.4.2.0001".

Nová verze je k dispozici v menu QHora routeru - sekce Firmware, nebo je možné jej stáhnout i na webové stránce "Centrum stahování".

Nové vlastnosti
  • Supports DDNS service.
  • Supports QVPN Client feature for the OpenVPN VPN protocol.
  • DNS is available for DHCP and PPPoE WAN interface in the Port Definition section.
  • Supports the 160 MHz channel in areas governed by CE, IC, OFCA, NCC, TELEC safety regulations.

Opravené chyby
  • The dashboard WAN overview would falsely display the data transfer rate over 10 Gbps if the Ethernet frame size is below 1510 bytes and the user uses the 10 Gbps port to test the LAN to WAN throughput.
  • The 5 GHz wireless signal (SSID) would become inaccessible if the channel is set to 165 and the bandwidth is changed from 20 MHz to 80 MHz.
  • Modifying the DHCP server settings and the reserve IP address settings in the VLAN page would display a network error.
  • EXT4 formatted USB devices connected to the router would not allow write access.
  • Users could enter "0" in the fourth byte location of the static route next hop IP address.
  • The Internet connection timeout error message would be displayed before completely establishing whether the Internet connection has severed from the router.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 04 úno 2021, 13:20
od lars
QNAP vydal další verzi s označením "1.4.3.0001 build 20210202" - ale je tam jen malé info ohledně jedné opravy:

[Fixed Issues]
- QHora-301W information shows abnormally on the dashboard of QuWAN Orchestrator.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 09 úno 2021, 08:20
od lars
QNAP vydal další verzi s označením "1.4.4.0001 build 20210202" - ale je tam jen malé info ohledně jedné opravy:

[Fixed Issues]
- When Qhora-301W disconnects from the Internet, it needs a force reboot to recover.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 10 bře 2021, 16:40
od lars
QNAP vydal další verzi s označením "1.4.6.0001 build 20210304" - ale opět je tam jen malé info ohledně jedné opravy:

[Fixed Issues]
- When the sessions of QHora-301W are fully loaded, the router can’t access the Internet.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 01 dub 2021, 08:41
od lars
Vyšel nový firmware pro QNAP router QHora-301W s označením "1.5.4.0001".

Nová verze je k dispozici v menu QHora routeru - sekce Firmware, nebo je možné jej stáhnout i na webové stránce "Centrum stahování".

Nové vlastnosti
- Supports loopback for QuRouter WAN interface on QuWAN Orchestrator to allow two routers in an organization to share the same private IP address.

Vylepšení
- Optimized and revised system script components.

Opravené chyby
- Users could not access QuRouter if the Qualcomm NSS driver malfunctioned.
- Firewall rules would not work after rebooting the router. Users would have to manually disable and enable the rules to implement them.
- If the VPN client username is over 8 characters, the VPN client could not connect to the QBelt QVPN server.
- Qfinder Pro would display IP address "0.0.0.0" after rebooting the router.
- Specifying an IP subnet different from that of the default gateway in the WAN interface page during the initial configuration process would display an error message; however, users could still proceed to the next step after clicking "Apply".

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 08 dub 2021, 13:44
od lars
QNAP dnes vydal další verzi s označením "1.5.5.0001 build 20210401" - ale opět je tam jen malé info ohledně jedné opravy:

[Fixed Issues]
- There is a possibility that users fail to download files via web browsers.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 15 dub 2021, 16:40
od lars
QNAP dnes vydal další verzi s označením "1.5.6.0001 build 20210408" - ale opět je tam jen malé info ohledně jedné opravy:

[Fixed Issues]
- Optimized system memory to increase router performance.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 13 kvě 2021, 21:38
od lars
QNAP vydal 11. května další verzi firmware s označením "1.5.8.0001 build 20210429" - ale opět je tam jen malé info ohledně oprav:

[Fixed Issues]
- Users fail to join QuWAN Orchestrator normally in China.
- Fixed tproxy issue.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 27 kvě 2021, 22:23
od lars
Vyšel nový firmware pro QNAP router QHora-301W s označením "1.6.4.0001 build 20210521".

Nová verze je k dispozici v menu QHora routeru - sekce Firmware, nebo je možné jej stáhnout i na webové stránce "Centrum stahování".

Nové vlastnosti
- Support DMZ
- Support Port forwarding range
- Support Service management
- Support Remote Help
- Support ESP protocol in Service Management page
- Support domain (Global or China) selection

Vylepšení
- Guest Wifi in Router is excluded from QuWAN.
- Users need to change the password for local account in initial process.

Opravené chyby
- Users can only access QuRouter via https from WAN port.
- When connection type of router is changed from DHCP to PPPoE, router can get an IP address. However, it can't access the Internet.
- Router will auto-reboot because of a third-party DPI issue.

Re: QuRouter (fw) pro router QHora-301W [finální verze]

Napsal: 10 čer 2021, 09:22
od lars
Vyšel nový firmware pro QNAP router QHora-301W s označením "1.6.5.0001 build 20210607".

Nová verze je k dispozici v menu QHora routeru - sekce Firmware, nebo je možné jej stáhnout i na webové stránce "Centrum stahování".

Opravené chyby
  • The throughput of 10GbE port will reduce to 450Mb after the router joins QuWAN Orchestrator.
  • When the device is in AP mode, 1GbE Port 1 - Port4 can’t work.
  • QuWAN VPN tunnel can’t be built successfully.
  • DDNS function can’t work normally.